FK-5-1-12 NOVEC 1230 Agent For Energy Storage Battery Boxes With Zero Residue

NOVEC 1230 (FK-5-1-12) Clean Agent is an environmentally friendly clean gas fire extinguishing agent, which has significant advantages such as being non-toxic, non-conductive, non-corrosive and non-residual. The NOVEC 1230 (FK-5-1-12) Clean Agent rapidly vaporizes after release, capable of quickly interrupting the combustion chain reaction to achieve efficient fire extinguishing, while not causing any damage to the precision electronic components and high-voltage equipment in the energy storage battery box. It is particularly suitable for high-risk enclosed Spaces in new energy storage systems, such as containerized energy storage stations, lithium battery cabinets, and battery module protection boxes, and is currently the ideal choice to replace traditional water-based or dry powder fire extinguishing systems.

In high-density energy concentration areas such as energy storage battery boxes, once a fire breaks out, it often has the characteristics of rapid spread, difficult suppression and high re-ignition rate. Traditional fire extinguishing methods may cause secondary damage, such as short circuits, equipment rusting and even affecting battery performance. The NOVEC 1230 (FK-5-1-12) Clean Agent is precisely a clean fire extinguishing solution tailored for such special scenarios. It can suppress fire without affecting the operation of the system. After extinguishing the fire, there is no need to clean up the residues, which greatly shortens the recovery time and enhances the safety and availability of the energy storage system. In addition, this fire extinguishing agent has excellent thermal stability and can maintain outstanding fire extinguishing efficiency even in high-temperature environments. It is suitable for various battery packaging forms and structural layouts.

From an environmental protection perspective, NOVEC 1230 (FK-5-1-12) Clean Agent has no destructive effect on the ozone layer. Its global warming potential (GWP) is extremely low, only 1, and the atmospheric retention time is short. It complies with the requirements of international environmental protection regulations such as the Kigali Amendment and is a key component in green energy facilities. Its colorless and odorless characteristics further enhance the safety and applicability of application scenarios, making it particularly suitable for deployment in areas where personnel need to maintain or inspect energy storage equipment. Combined with the intelligent detection and linkage control system, the NOVEC 1230 (FK-5-1-12) Clean Agent can achieve early warning, precise release and remote monitoring, significantly improving the automatic fire response capability of the energy storage battery box.

Application:

The differentiated advantages in the scenario of energy storage battery boxes
Energy storage battery boxes are usually deployed in closed, high-temperature and high-voltage environments, and the speed of fire spread is extremely fast. The 3D fire extinguishing capability (total flooding coverage) of NOVEC 1230 (FK-5-1-12) can penetrate the gaps of battery modules, precisely penetrate the core area of thermal runaway, and achieve rapid suppression in the early stage of the fire (within 30 seconds). Experimental data shows that the extinguishing efficiency of this fire extinguishing agent for lithium battery fires is over 40% higher than that of ordinary fire extinguishing agents, and it does not pose a secondary short circuit risk to the battery pack. In addition, its supercritical fluid characteristics allow for stable storage in an environment ranging from -10℃ to 50℃, meeting the demands of energy storage facilities under extreme climatic conditions.
Technical parameters and system integration
The physical characteristics of NOVEC 1230 (FK-5-1-12) further enhance its applicability in energy storage scenarios:
Boiling point 49.2℃ : It is stored in liquid form under normal pressure and released in gas form when extinguishing fires, with no liquid droplet residue.
The evaporation rate is 60 times that of water: Rapid vaporization absorbs heat, and the cooling efficiency far exceeds that of conventional media.
Design concentration 5-7% : Far below the personnel safety threshold (10%), it supports real-time protection in manned environments.
In terms of system integration, the NOVEC 1230 fire extinguishing device can be linked with the Battery Management System (BMS) and achieve millisecond-level response through multi-level fire detection technology (composite sensors for temperature, smoke and gas). For instance, a case of a leading energy storage enterprise shows that after adopting this solution, the fire loss rate of battery boxes decreased by 85%, and the maintenance cost was reduced by 60%.



Company profile:

Guangzhou Xinlin Fire Fighting Equipment Co., Ltd., established in 2017 with a registered capital of RMB 10 million, is a leading provider of advanced fire safety solutions headquartered in Dongzhou Industrial Park, Xintang Town, Zengcheng District, Guangzhou. Committed to innovation and reliability, the company specializes in state-of-the-art clean gas automatic fire extinguishing systems, including FM200(HFC-227ea),Novec1230,IG541 and IG100 systems, complemented by sophisticated gas fire alarm control panels.These products are widely adopted across diverse sectors, such as municipal infrastructure, power plants, telecommunications, healthcare facilities, and construction projects, thanks to their efficiency, safety, and environmental sustainability.

Supported by over 30 patents and a team with more than eight years of collective expertise in fire protection engineering, Xinlin Fire offers comprehensive services spanning system design, engineering, and seamless project execution. Operating from a modern 2398 - square - meter facility, Xinlin Fire integrates automated production lines and cutting - edge testing equipment to ensure consistent, high - quality output.
The company's production system has passed the dual certifications of the internationally authoritative SGS factory inspection certification and the German TÜV Rheinland factory inspection. At the same time, it has obtained ISO 9001 (Quality Management System), ISO 14001 (Environmental Management System), and ISO 45001 (Occupational Health and Safety Management System). Ensure that every link of the product from production to delivery complies with international standards. In addition, we also provide Chemical Data Sheets (MSDS) to comprehensively ensure the compliance and safety of product transportation, storage and use. Choosing us means choosing professionalism and trust.