
Add to Cart
FM200 Clean Agent HFC-227ea Fire Suppression System Residue-Free and Non-Conductive Protecting Precision Equipment
Technical parameter:
No. | Product | Parameter | |||
1 | Brand | XinLin | |||
2 | Place of Origin | Guangzhou, Guangdong, China | |||
3 | Capacity | 1,1,1,2,3,3,3- Heptafluoropropane | |||
4 | Purity | 99.9%≥ | |||
5 | Solubility In Water | Negligible | |||
6 | Odor | Odorless | |||
7 | Composition | FM200/HFC-227ea | |||
8 | Applications | Precision equipment |
Description:
FM200 (HFC-227ea) Clean Agent, as a new generation of clean fire extinguishing agent specially designed for precision equipment, redefines the high-end fire protection standard with its unique chemical properties. Compared with traditional carbon dioxide (CO₂) fire extinguishing agents, its core advantage directly targets the pain points of protection for precision equipment:
Double excellence in fire extinguishing efficiency and safety: FM200 Clean Agent only requires a concentration of 8-10% to suppress the combustion chain reaction within 10 seconds, while CO₂ needs to reach a concentration of more than 34%. The latter will significantly reduce the environmental oxygen content (< 15%) when extinguishing fires, which may pose a risk of oxygen deficiency to equipment operation and maintenance personnel. Especially in unattended precision equipment rooms, the low-concentration and highly efficient fire extinguishing characteristics of FM200 Clean Agent are even more irreplaceable.
Zero residue and no damage features: After the FM200 automatic gas fire extinguishing system displaces, it completely vaporizes without any solid particles, liquid residue or condensate water, causing no pollution to precision components such as circuit boards, optical components and magnetic media. In contrast, when CO₂ is used for fire extinguishing, it may cause a "cold shock effect" due to low temperatures, leading to condensation on the surface of the equipment or embrittlement of the solder joints. A certain semiconductor factory's actual measurement shows that the failure rate of precision instruments after CO₂ fire extinguishing is as high as 25%, while the post-disaster failure rate of equipment protected by the FM200 gas fire extinguishing system is less than 1%.
Non-conductive and compatible with live operation: The insulation resistance of the FM200 gas fire extinguishing system is greater than 10¹²Ω, which can be directly used to extinguish fires in live equipment (such as running servers and photolithography machines), avoiding data loss or process interruption caused by power failure. Although CO₂ has insulating properties, high-pressure discharge may cause aerodynamic shock to the equipment, resulting in component displacement or interface loosening.
Application:
Protection of semiconductor and electronic manufacturing equipment
In the lithography machine and deposition equipment areas of the chip production line, the FM200 Clean Agent achieves nanoscale protection through a total flooding fire extinguishing system:
When a fire is caused by the failure of temperature control in the photoresist storage cabinet, the concentration of FM200 Clean Agent rises to the designed value within 6 seconds, suppressing the flame while avoiding the carbonization of the photoresist and contaminating the clean room. A case of a certain wafer fabrication plant shows that after the EUV lithography machine area was protected by the FM200 fire suppression system, the fire caused by overheating of the laser optical path was successfully intercepted, and assets worth more than 150 million US dollars for a single device were preserved.
The system can be linked with the process control system of the equipment. When extinguishing a fire, it will automatically suspend the operation of the vacuum chamber to prevent wafer damage caused by sudden pressure changes, saving 72 hours of production capacity recovery time compared with CO₂ fire extinguishing.
2. Protection of medical images and scientific research instruments
In scenarios such as MRI rooms in hospitals and mass spectrometer laboratories in scientific research institutions, the local application systems of the FM200 Gas Suppression System demonstrate unique value:
Tube FM200 Automatic Fire Extinguisher is installed between MRI superconducting magnets. When liquid helium leakage causes an electrical short circuit, the agent can be precisely sprayed to the fire source, preventing the magnets from being overexcited (which would cost millions of dollars to re-excite). Data from a certain tertiary hospital shows that after adopting this solution for its 3.0T MRI equipment, the fire response time was shortened to 8 seconds, which was 50% higher than that of the traditional CO₂ system.
Company profile:
Guangzhou Xinlin Fire Fighting Equipment Co., Ltd., established in 2017 with a registered capital of RMB 10 million, is a leading provider of advanced fire safety solutions headquartered in Dongzhou Industrial Park, Xintang Town, Zengcheng District, Guangzhou. Committed to innovation and reliability, the company specializes in state-of-the-art clean gas automatic fire extinguishing systems, including FM200(HFC-227ea),Novec1230,IG541 and IG100 systems, complemented by sophisticated gas fire alarm control panels.These products are widely adopted across diverse sectors, such as municipal infrastructure, power plants, telecommunications, healthcare facilities, and construction projects, thanks to their efficiency, safety, and environmental sustainability.
Supported by over 30 patents and a team with more than eight years of collective expertise in fire protection engineering, Xinlin Fire offers comprehensive services spanning system design, engineering, and seamless project execution. Operating from a modern 2398 - square - meter facility, Xinlin Fire integrates automated production lines and cutting - edge testing equipment to ensure consistent, high - quality output.
The company's production system has passed the dual certifications of the internationally authoritative SGS factory inspection certification and the German TÜV Rheinland factory inspection. At the same time, it has obtained ISO 9001 (Quality Management System), ISO 14001 (Environmental Management System), and ISO 45001 (Occupational Health and Safety Management System). Ensure that every link of the product from production to delivery complies with international standards. In addition, we also provide Chemical Data Sheets (MSDS) to comprehensively ensure the compliance and safety of product transportation, storage and use. Choosing us means choosing professionalism and trust.
Q1: Are you a manufacturer or a trading company?
A1: We are a professional manufacturer specializing in gas fire suppression systems.
Q2: Can you give me a sample order?
A2: Yes, of course you can. We welcome you to order samples to test and check the product quality. Provide mixed samples.
Q3: Do you offer OEM products?
A3: Yes, we welcome your own designs and drawings.
Q4: Where is your factory located?
A4: Our factory is situated in the East Lake Industrial Park of XinTang Town, Zengcheng District, Guangzhou City, Guangdong Province, China.
Q5: How can I get to your factory?
A5: Due to convenient transportation, you can reach us by taxi or by subway. If taking the subway, please take Line 13 to Shacun Station. Before disembarking, kindly inform us in advance, and we will arrange for a comfortable business van to pick you up from there.